Bering Yachts has presented the first hull of its BC60 aluminium explorer catamaran, which has already been delivered and is afloat. The 18.9-metre vessel marks the shipyard’s move to a twin-hull platform while retaining the long-range capability and structural robustness associated with its established explorer vessels. Founder and chief executive Alexei Mikhailov provided a detailed walkthrough of the design and onboard systems.
Displacement platform and range
The BC60 measures 18.9 metres overall with an 8.6-metre beam. Bering describes it as a displacement explorer rather than a high-speed production catamaran. Its all-aluminium construction, shallow draft and substantial fuel capacity are intended to support extended passages and greater autonomy at sea.
The vessel has a draft of 1.58 metres and carries more than 13,500 litres of fuel. This supports a range of more than 3,500 nautical miles at a cruising speed of 8 knots. Fresh-water capacity is approximately three cubic metres, while the grey-water and black-water tanks each hold 1,500 litres.
Aluminium construction and systems layout
The twin-hull design applies Bering’s explorer philosophy to a catamaran layout, with space arranged for the equipment and storage needed on long journeys. Deep sponsons contain a two-level engine-room arrangement, giving access to generators, watermakers, sewage-treatment equipment and other systems. The configuration also helps separate noise and vibration from living areas, supporting comfort during longer passages.
Protected running gear and attention to structural integrity reflect a safety-oriented approach. The aluminium construction and resulting weight distribution also allow a fully enclosed flybridge that serves as a second salon.
Accommodation and enclosed flybridge
The main deck has a spacious salon and a full helm station with 360-degree visibility. A professional galley is arranged on both sides of the space and equipped for practical onboard use. One spacious chamber accommodates the master room, which includes space to walk around the bed, panoramic windows, a walk-in wardrobe and an en-suite bathroom with a full shower. The opposite sponson contains two guest cabins, each with its own bathroom.
The layout also includes a dedicated crew cabin, laundry and pantry areas, additional refrigeration capacity and extensive storage throughout the vessel. These features are intended to support extended stays aboard, whether the catamaran is owner-operated or managed by a small professional crew.
Above, the enclosed flybridge includes a bar, refrigeration, a day bathroom and 360-degree visibility. The space can be configured as a lounge, gym or office, giving the vessel additional flexibility for life and work at sea.
Designed for extended time at sea
Mikhailov highlighted low sound and vibration levels at cruising speed, alongside storage capacity and onboard systems intended to support self-sufficiency during long passages. He said the design applied range, reliability, quiet running and long-term self-sufficiency proven on the B72 and B88 to a catamaran platform, and characterised the BC60 as a displacement exploration craft rather than a leisure cat.
With its range of more than 3,500 nautical miles, shallow draft and all-aluminium construction, the BC60 brings together the practical requirements of a long-range explorer and the additional space offered by a catamaran platform. The first hull’s delivery and launch mark the practical realisation of Bering Yachts’ twin-hull explorer approach, extending design principles established in its B72 and B88 models to a new vessel format.
