Fives High Precision Machines (Fives HPM) is promoting the Liné Machines RoboTDM, a robotic machining system that carries out milling, trimming and drilling directly on large workpieces instead of bringing the part into a large machine tool envelope. The company positions the system for applications where tolerances down to roughly 0.1 mm are acceptable, arguing that a large CNC machine can mean paying for capability the job does not actually require.
RoboTDM pairs an industrial robot with a specialised end effector carrying a spindle, toolholder and cutter, so material removal happens on the workpiece itself. Fives lists potential operations including face milling and deburring, removal of burrs from castings, trimming excess weld beads, drilling pilot holes in large aerospace panels or automotive body parts, and trimming, routing, drilling, edge contouring and pocketing on large composite or thermoplastic fabrications.
Closing the accuracy gap
Conventional industrial robots have typically achieved positional tolerances of around 0.3 mm, a level the company describes as insufficient for many machining tasks. Fives says its development work concentrated on high-precision robotic machining, combining robot calibration with look-ahead and motion-planning algorithms that allow programs containing more than one million points to be processed without the latency that can otherwise compromise robot motion.
According to Fives, the resulting smoother trajectory execution supports multi-axis contouring and complex operations in a way more closely comparable with CNC machining, and the system can reduce machining deviation to within 100 μm (0.1 mm). The company describes this as a threefold improvement over conventional robotic accuracy, widening the range of applications for which robotic machining becomes viable.
Cycle time and configuration
Fives reports that an R&D project and development trials spanning several years demonstrated cycle-time reductions of up to 70% in trimming and milling, with some individual applications achieving even greater savings. The company links the gains to quicker set-up and easier programming than a large CNC machine requires, as well as to the fact that oversized components no longer have to be moved through a machine envelope.
The machining end effector can be configured with different spindle sizes, power ratings, torque and speed. Available systems offer spindle power up to 125 kW, torque up to 80 Nm and speeds reaching 30,000 rpm, with HSK A63, HSK F63 or HSK A100 taper toolholders. Options include automatic tool changing, tool measurement, tool-breakage detection and part probing, while a vision system can support drilling work. The platform can also be configured for processes such as waterjet cutting, laser profiling and ultrasonic cutting.
RoboTDM can be set up with multiple workstations and customised peripheral equipment, and Fives notes that its relatively modest foundation requirements simplify installation compared with a large CNC machine tool. The company sees this as particularly attractive in aerospace, defense, maritime and energy, where component dimensions can be substantial and production requirements vary considerably.
Scope and limits
Fives is explicit that the technology does not solve every machining challenge: where tolerances tighter than 0.1 mm are necessary, a high-precision CNC machine remains the appropriate choice, and RoboTDM is presented as complementary to Liné Machines and the wider Fives HPM portfolio of high-precision machine tools.
The system reflects Fives HPM's "precision at scale" cross-brand positioning, in which scale means applying precisely the level of accuracy an application demands, and illustrates the pooling of individual brand capabilities under the newly unified Fives HPM banner, with the Liné Machines brand contributing its experience in large-scale milling and material removal. Fives says the development originated directly from customer requirements. Fives Liné Machines Inc, now part of Fives HPM, has had a presence in North America for almost 50 years through its facility in Granby, Quebec, Canada, which produces both Liné CNC machine tools and robotic solutions including RoboTDM and also hosts engineering, integration, automation, service and training support.
