Industrial Machinery

KraussMaffei Extrusion Introduces Continuous PVC InlineMixing Process for Roofing Membranes

A single-stage dosing and extrusion route aims to replace separate hot-cold mixing, with the company reporting lower energy use and greater formulation flexibility.

Katarina VukovicNovember 17, 20265 min read0 views

A conceptual cutaway of a continuous PVC roofing membrane line shows gravimetric feeders, a twin-screw extruder and calender rollers in an industrial hall.

KraussMaffei Extrusion has developed a continuous single-stage extrusion process for PVC roofing membranes. The PVC InlineMixing process is designed to replace the conventional two-stage route in which a dryblend is produced batchwise in a separate hot-cold mixer, cooled and stored before being plasticized in a twin-screw extruder.

In the new process, all solid and liquid components are fed directly into the extruder through gravimetric dosing systems according to the formulation. According to KraussMaffei, this removes the need to invest in a separate heating-cooling-mixing combination and means the material is heated only once.

Lower energy and operating costs

The company says energy consumption and related costs can be reduced by up to 75%, depending on the formulation, system parameters and location. Eliminating the separate mixing step also reduces the space required for the overall system and lowers labor costs, while maintenance requirements fall because wear parts for the heating-cooling mixer are no longer needed.

KraussMaffei states that the combination of lower capital expenditure and lower operating costs improves overall cost-effectiveness and creates the conditions for a rapid return on investment. These are company assessments; actual results will depend on the specific formulation and production setup.

Formulation changes during operation

The continuous process is also intended to provide more flexibility. Formula adjustments and color changes can be made directly during operation through the integrated control system, according to KraussMaffei. This avoids the time-consuming preparation and interim storage of separate dryblend batches.

Christopher Bartel, Head of Sales Flat & Foam at KraussMaffei Extrusion, said the process offers roofing membrane manufacturers lower production costs, greater flexibility and more efficient manufacturing. He added that producers can respond more quickly to new requirements, adjust formulations during production and reduce both energy use and capital expenditure.

Validation and industrial operation

The process was developed at the KraussMaffei Extrusion Technology Center in Laatzen and validated with industrial roofing membrane formulations. The tests used a co-rotating twin-screw extruder from the ZE 65 BluePower series, equipped with loss-in-weight feeders for all solid components and multiple liquid feeders for free-flowing formulation components.

The ZE BluePower series has a Da/Di ratio of 1.65. KraussMaffei says the combination of high torque and large free volume provides a wide process window for different formulations. Tests confirmed high gelation levels and product quality, while the mechanical properties and weldability of the membranes met industrial requirements across several formulations.

Bartel said the results demonstrate the potential of PVC InlineMixing for industrial roofing membrane production. At the Technology Center, KraussMaffei works with customers to test specific formulations under production-relevant conditions, optimize the process and prepare the basis for industrial implementation.

PVC InlineMixing is already in use in an industrial production line for PVC roofing membranes. The reference plant achieves a total throughput of 1,800 kg/h using two extruders and two calenders. PVC, additives and fillers, as well as resulting edge trimmings, are continuously processed directly into finished membranes.

KraussMaffei is positioning PVC InlineMixing as a leaner production route that combines product quality with lower cost and higher flexibility. The reported energy savings and operational benefits vary with formulation, system parameters and location, so each installation will need to be assessed against its own production conditions.