SinceVision has introduced the SGI-N030W, a laser displacement sensor designed for high-speed, non-contact dimensional measurement on rough, textured and irregular surfaces. The sensor expands the company’s SGI Series portfolio and uses a wider laser spot with optical triangulation to reduce instability that conventional point-spot systems can encounter when surface finish varies.
The company says point-spot sensors concentrate reflected laser energy on a small area, so microscopic scratches, grain boundaries, brushed textures and matte finishes can create signal variations that look like dimensional changes. Those variations can trigger false defect warnings and additional inspection. The SGI-N030W collects reflected light across a broader area, averaging localised peaks and valleys before signal conversion. SinceVision says this reduces the influence of surface roughness and optical scattering on materials such as drawn metals, sandblasted surfaces and coated battery foils.
Measurement specifications
The sensor has a 30 mm reference distance and a ±5 mm measurement range. SinceVision specifies 0.05 µm repeatability on a diffuse white target under static conditions and linearity of ±0.02% of full scale across the range. Sampling runs at 50 kHz, equivalent to a 20 µs update interval, for high-speed measurement and monitoring of dynamic processes.
Communication options include RS485, 100Base-TX Ethernet and switchable analogue outputs for 4–20 mA current or 0–10 V voltage signals. Master-slave synchronisation allows two sensors to operate in opposition, measuring from either side of a component or moving material.
Battery electrode inspection
One target application is in-line thickness measurement of lithium-ion battery electrodes, where coating thickness and uniformity affect energy density, internal resistance and long-term cell stability. SinceVision notes that offline contact micrometers or drop indicators can introduce operator variability and potentially deform wet or uncured electrode material, while periodic spot checks do not provide continuous coverage across a production reel.
In the proposed arrangement, two synchronised sensors sit above and below a moving electrode web on a calibrated, low-thermal-expansion marble gantry. The opposing heads measure clearance to the material, and a controller combines those readings with the fixed mounting datum to calculate absolute thickness in real time. SinceVision reports production trials with stable, repeatable thickness measurement within ±0.3 µm at a web speed of 300 mm/s. The company says 50 kHz sampling provides longitudinal resolution to detect localised coating agglomerations, edge thinning and exposed substrate before the electrode reaches cell winding.
Semiconductor and assembly uses
The sensor is also intended for semiconductor manufacturing, where non-contact measurement helps with sensitive wafer surfaces. Potential uses include wafer position verification, edge detection, height measurement and checks of wafer seating and chuck alignment in atmospheric transfer modules and vacuum load-lock systems.
In precision assembly, SinceVision points to monitoring voice coil motors, linear actuators and micro-steppers. The 50 kHz rate is intended to capture transient displacement, mechanical oscillations, settling behaviour and end-stop overshoot across the full range. Position data can go to machine control systems through the Ethernet interface for real-time monitoring and process control.
Surface errors in production
Jack Li, global sales and marketing director at SinceVision, says false defect warnings caused by surface texture remain a recurring challenge in battery manufacturing and precision assembly. He says conventional point-beam laser sensors can interpret microscopic scratches and rough coatings as thickness variations, slowing production lines and creating a need for manual inspection. The SGI-N030W’s expanded spot is designed to average out those surface-related variations, while synchronisation between opposing heads supports high-speed thickness verification.
